Garrett-metal-detectors SEA HUNTER MARK ll Manuel d'utilisateur télécharger pdf

OPERATING INSTRUCTIONS:

SEA HUNTER MARK ll

The Sea hunter Mark ll is an extremely versatile detector, offering four (4) mounting/stem

arrangements to suit your search needs.

• Long stem with the housing mounted above the stem.

• Long stem with the housing mounted below the cuff assembly.

• Short stem with mounting as above for diving.

• Belt mounting leaving the stem free of housing. This may be used with either stem

configuration.

ASSEMBLY INSTRUCTION

Choose the desired operating stem/housing configuration and assemble the stem.

1. Compress the button ends of the spring clip and insert, button end first, into the lower stem

of the detector so that the button ends pop out of the holes. This will enable the lower stem

assembly to be attached to the upper stem and the over all length of the detector adjusted

for a comfortable operating length.

2. Attach the lower stem to the searchcoil by inserting the two rubber washers into the stem

and slipping the searchcoil onto the stem. Insert the threaded bolt through the holes and

hand-tighten the two knobs.

3. Install the upper stem to the lower and adjust for the most comfortable operating length.

4. Wrap the searchcoil cable snugly about the stem with the first turn of the cable over the

stem.

5. Insert the cable connector into the connector on the detector housing and

hand-tighten

securely. Do not over tighten. Ensure that the searchcoil connector is clean and the o-ring

is lubricated. If necessary use a very small amount of silicon grease or petroleum jelly. Do

not coat the connector pins with lubricant.

6. Perform a battery test by turning the detector on. Note the number of audio tones that

occur. Pass a metal target such as a coin beneath the searchcoil to confirm metal

detection.

CONTROL FUNCTIONS

Familiarize yourself with the detectors controls. Their basic functions are given here. How

they can help you find treasure is explained in the Operating Instructions of this Manual.

Power/ Depth:

• Turns the detector on. The batteries are checked automatically and audibly each time

the detector is turned on.

• Turns the detector off.

• Selects either of the two (2) search modes.

1 2 3 4 5 6 7

Résumé du contenu

Page 1 - SEA HUNTER MARK ll

OPERATING INSTRUCTIONS: SEA HUNTER MARK ll The Sea hunter Mark ll is an extremely versatile detector, offering four (4) mounting/stem arrangements t

Page 2 - SEARCH MODES

Raise searchcoil approximately one foot above the ground. Rotate this knob to turn the detector on and the detector begins operating. Each time the

Page 3 - OPERATING INSTRUCTIONS

This search mode is exclusive to the Sea Hunter Mark ll. It is similar in operation to the Motion Discrimination mode in that it provides more precise

Page 4 - OPERATING RECOMMENDATIONS

the batteries are checked automatically and audibly. Four or more tones indicate the batteries are very good, two tones indicate the batteries are ade

Page 5 - REPAIR SERVICE

As you operate and use your Garrett detector, you will quickly grow more proficient in its use. It is recommended that you build your own test plot.

Page 6 - MIND YOUR MANNERS

 You have read this Owner’s Manual carefully  You have checked batteries, switches and connectors. (Check batteries especially closely. They ar

Page 7 - WARNING!

 I will not destroy property, buildings or the remains of ghost towns and other deserted structures.  I will not leave litter or uncovered items

Commentaires sur ces manuels

Pas de commentaire

Garrett-metal-detectors SEA HUNTER MARK ll Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Sécurité Garrett-metal-detectors SEA HUNTER MARK ll. Garrett Metal Detectors SEA HUNTER MARK ll User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels